Specifications
- Triple quartz coil atomizer, housed inside a pure quartz chamber
- Ready to use within five (5) seconds of powering-on
- Temperature indicator: “P” logo is Red when heating, and Green when ready
- 1100mAh Lithium battery
- Dimensions: 2.1″ (H) x 1.2″ (W) x .86″ (D)
- Typical charge time: 1.5hrs
How it Works
The Pulsar APX Wax vaporizer is very simple to use, making it an excellent choice for anyone wanting to consume concentrates without the hassle of a complicated setup. Power is turned-on with a typical five clicks of the power button. The four LEDs will light-up to indicate how much battery is remaining. At this point, the Pulsar APX Wax vaporizer is ready to operate. If you haven’t already, load the desired amount of concentrate onto the Triple Quartz coils. It’s recommended to start with a small breadcrumb size piece, and then adjust accordingly as you go based on your personal preference. After loading the atomizer with concentrate, replace the mouthpiece, then press and hold the power button to activate the Triple Quartz coils. Within five seconds, the temperature indicator will change from Red to Green, and the concentrate will have been vaporized, developing a cloud inside the mouthpiece. Release the power button, and carefully inhale the desired amount of vapor, and repeat until all vapor has been removed from inside the mouthpiece. For more information, refer to the User Manual after purchase.
Water Bubbler Attachment
Enjoy cool, clean hits with one of Pulsar’s bubbler attachments. For a comfortable mouth fit like hitting a bong, check out the Pulsar APX Wax and Volt Water Bubbler Attachment | Bent. For a straight-forward, more portable bubbler option, check out the Pulsar APX Wax and Volt Bubbler Attachment | 4″ Straight. Both bubblers feature durable borosilicate glass and a water percolation chamber – turning the APX Wax vaporizer into a powerful portable rig! Add one or more to your order and SAVE EXTRA $!
Atomizer Options
The Pulsar APX Volt includes one triple quartz coil atomizer in the package. However, two other atomizers are interchangeable, and can be used with the Volt. Below is the characteristics of each atomizer:
- Triple Quartz: Triple the surface area means bigger rips.
- Coil-less Quartz: Dab at lower temps, producing superior flavor.
- Barb Coil: Dual ribbon twist Kanthal wrapped quartz coil, super-fast heating producing big clouds.
Add one or more spare atomizers to your order and SAVE EXTRA $!
Maintenance
After finishing each session, it’s recommended to do a quick burn-off of residual concentrate on the coils (to avoid buildup of material that will eventually affect flavor). This is done by first removing the mouthpiece and turning-on power, then hold the power button for five seconds, allowing any remaining concentrate to burn-off. If you still see residual concentrate, this process can be repeated. You can also clean any of the parts using 91% Isopropyl Alcohol (available at most drug stores). Dip a Q-tip into the alcohol, then gently rub around the chamber and coils of the atomizer. You can also soak the borosilicate mouthpiece in the 91% alcohol for 15-20 minutes, followed by a rinse in warm water. Before using any of the parts after cleaning, it’s recommended to power the Pulsar APX Wax vaporizer on, and hold the power button for five seconds to burn-off any residual alcohol.
Other Concentrate Vaporizer Choices
If the Pulsar APX Wax vaporizer isn’t what you’re looking for, check out Lord Vaper Pen’s many other choices HERE!
