- Pure quartz coil-less cup (see Atomizer Options section below for other choices)
- Voltage settings: 2.5V, 2.8V, 3.2V, 3.7V
- Enhanced LED display
- 2-click hands-free Power Mode
- Ready to use within five (5) seconds of powering-on
- Temperature indicator: “P” logo is Red when heating, and Green when ready
- 1100mAh Lithium battery with TYPE-C USB fast charging
- Dimensions: 2.1″ (H) x 1.2″ (W) x .86″ (D)
- Typical charge time: 1.5hrs
How it Works
The Pulsar APX Volt vaporizer is very simple to use, making it an excellent choice for anyone wanting to consume concentrates without the hassle of a complicated setup. With the ability to select between four voltage settings, you’ll be able to experiment and find the right setting for you. There’s no right or wrong voltage setting, but generally a lower voltage will produce a very flavorful, cooler vapor, while a higher voltage will produce a large, intense cloud of vapor.
Power is turned-on with a typical five clicks of the power button. At this point, the Pulsar APX Volt vaporizer is ready to operate. If you haven’t already, load the desired amount of concentrate into the coil-less quartz cup. It’s recommended to start with a small breadcrumb size piece, and then adjust accordingly as you go, based on your personal preference. After loading the cup with concentrate, replace the mouthpiece, then press and hold the power button to activate the quartz cup, which will start melting of the concentrate. Within a few seconds, the concentrate should be melted, and have started vaporizing. Release the power button, and carefully inhale the desired amount of vapor, and repeat until all vapor has been removed from inside the mouthpiece. For more information, refer to the User Manual after purchase.
Water Bubbler Attachment
Enjoy cool, clean hits with one of Pulsar’s bubbler attachments. For a comfortable mouth fit like hitting a bong, check out the Pulsar APX Wax and Volt Water Bubbler Attachment | Bent. For a straight-forward, more portable bubbler option, check out the Pulsar APX Wax and Volt Bubbler Attachment | 4″ Straight. Both bubblers feature durable borosilicate glass and a water percolation chamber – turning the APX Wax vaporizer into a powerful portable rig! Add one or more to your order and SAVE EXTRA $!
The Pulsar APX Volt includes one coil-less quartz atomizer in the package. However, two other atomizers are interchangeable, and can be used with the Volt. Below is the characteristics of each atomizer:
- Coil-less Quartz: Dab at lower temps, producing superior flavor.
- Triple Quartz: Triple the surface area means bigger rips.
- Barb Coil: Dual ribbon twist Kanthal wrapped quartz coil, super-fast heating producing big clouds.
Add one or more spare atomizers to your order and SAVE EXTRA $!
After finishing each session, it’s recommended to do a quick burn-off of residual concentrate on the coils (to avoid buildup of material that will eventually affect flavor). This is done by first removing the mouthpiece and turning-on power, then hold the power button for five seconds, allowing any remaining concentrate to burn-off. If you still see residual concentrate, this process can be repeated. You can also clean any of the parts using 91% Isopropyl Alcohol (available at most drug stores). Dip a Q-tip into the alcohol, then gently rub around the inside of the cup. You can also soak the borosilicate mouthpiece in the 91% alcohol for 15-20 minutes, followed by a rinse in warm water, then let air dry. Before using any of the parts after cleaning, it’s recommended to power the Pulsar APX Volt vaporizer on, and hold the power button for five seconds to burn-off any residual alcohol.
Other Concentrate Vaporizer Choices
If the Pulsar Volt vaporizer isn’t what you’re looking for, check out Lord Vaper Pen’s many other choices HERE!
Product came in good condition
I like the first one so much I had to get another one
Great product. Performs very well. Battery is what it is for its size